Input
50
11.01.04 Coping programs and machine data onto the SD memory card
O To call up program management, see chapter 11.01.01 Calling up program
management.
O Select the data to be copied from the machine memory to the SD memory card (pro-
grams 01 - 99) by pressing the +/- keys under the symbol of the machine memory.
O When copying programs, select the program number for saving on the SD memory card
by pressing the +/- keys under the symbol of the memory card.
O Confirm the copying process by pressing the right plus key.
O Further menu items of program management are called up by pressing the left +/- keys.
If a program is already present on the SD memory card, a prompt for confir-
mation will be displayed. The program will be overwritten by pressing the right
plus key. Pressing the right minus key will cancel the operation.
O Press the left +/- keys until the corresponding menu item is displayed.
O Confirm selection of the menu item by pressing the right plus key.
COPY
«
COPY
«
2
1
To Next Page
Loading...
Need help?
General
