To Next Page

To Previous Page

Input

O Conﬁrm the copying process by pressing the right plus key.

O Further menu items of program management are called up by pressing the left +/- keys.

O Press the left +/- keys until the corresponding menu item is displayed.

O Conﬁrm selection of the menu item by pressing the right plus key.

COPY

ALL

COPY

ALL

10.01.07 Copying all programs and machine data in the machine memory

O To call up program management, see chapter 11.01.01 Calling up program

management.

Instruction Manual1
Table of Contents3
Safety6
Directives6
General Safety Instructions6
Safety Symbols7
Special Points of Attention for the Owner-Operator7
Operating Personnel and Technical Staff8
Operating Personnel8
Technical Staff8
Danger Warnings9
Proper Use10
Technical Data11
Pfaff 3511-3/0111
Disposal of the Machine12
Transport, Packaging and Storage13
Transport to the Customer's Premises13
Transport Within the Customer's Premises13
Disposal of the Packaging Materials13
Storage13
Work Symbols14
Operating Controls15
Main Switch15
Light Barrier15
Pedal16
Hand Lever to Raise the Sewing Foot16
Control Panel17
Plus/Minus Keys17
Plus/Minus Keys18
Set-Up and Initial Commissioning21
Set-Up21
Setting the Table Height21
Inserting the Sewing Machine into the Stand22
Connecting the Plug-In Connections and Ground Cable24
Assembling the Reel Stand25
Initial Start-Up26
Switching the Machine on / off27
Checking the Start Inhibitor Function27
Machine Drive Home Position27
Set-Up28
Inserting the Needle28
Winding the Bobbin Thread, Adjusting the Thread Tension29
Removing / Inserting the Bobbin Case30
Inserting the Bobbin Case / Adjusting the Bobbin Thread Tension30
Threading the Needle Thread / Adjusting the Needle Thread Tension31
Entering the Stitch Length32
Entering the Start and End Backtacks32
Inserting and Removing the SD Memory Card33
Inserting the Workpiece34
Loading the Sewing Template34
Inserting the Sewing Template35
Sewing36
Manual Sewing36
Programmed Sewing38
Entering the Authorisation Code40
Creating / Changing Seam Construction Diagrams41
Creating a Seam Construction Diagram in "Teach-In Mode41
Changing Seam Construction Diagrams45
Error Messages46
Input47
Program Management47
Calling up Program Management47
Displaying Programs in the Machine Memory48
Displaying Programs and the Machine Data on the SD Memory Card49
Coping Programs and Machine Data Onto the SD Memory Card50
Copying All Programs and Machine Data Onto the SD Memory Card51
Copying Single Programs and Machine Data in the Machine Memory52
Copying All Programs and Machine Data in the Machine Memory53
Deleting Programs in the Machine Memory54
Deleting Programs and Machine Data on the SD Memory Card55
Formatting the SD Memory Card56
Parameter Settings57
Selecting the User Level57
Example of a Parameter Entry58
List of Parameters59
Error Messages and Description64
Sewing Motor Errors64
Errors on the SD Memory Card64
Maintenance and Care65
Maintenance Intervals65
Cleaning the Machine65
Topping up the Oil Tank66
Checking / Setting the Air Pressure66
Cleaning the Maintenance Unit Air Filter67
Cleaning the Blower Air Filter67
Wearing Parts68

Brand	Pfaff
Model	3511-3/01
Category	Sewing Machine
Language	English

Pfaff 3511-3/01 User Manual

Table of Contents

Questions and Answers:

Pfaff 3511-3/01 Specifications

Related product manuals