Operational controls and optical displays
8 - 3
Messages in the display
a = counter value of stitch counter Z1
b = current seam segment:
Seam segment 0 for semi-automatic
operation, seam segments 1- 6 for
automatic operation:
0 = seam segment 0
1 = seam segment 1 of the 1st
shoulder seam
2 = seam segment 2 of the 1st
shoulder seam
seam with fullness
3 = seam segment 3 of the 1st
shoulder seam
4 = seam segment 4 of the 2nd
shoulder seam
5 = seam segment 5 of the 2nd
shoulder seam
seam with fullness
6 = seam segment 6 of the 2nd
shoulder seam
c= for fullness on
d = counter value of stitch counter Z2
Programming buttons on the quick control panel
Button G = positionwise switching to the
stitch counters Z1 and Z2; the
current position blinks in the
display.
Button + = alter selected positions
Button - = alter selected positions
Fig. 8 - 06
G
+
_
ab c
d
Fig. 8 - 07
To Next Page
Loading...
