Preparation
11 - 3
11.05 Threading the needle thread, adjusting the thread tension
● Thread the needle thread in accordance
with Fig. 11- 05.
● Adjust the needle thread tension by
turning the milled screw 1.
The needle is to be threaded
from left to right!
Do not operate the machine
without the take-up-lever
guard 2! Danger of injury
through the up and down
movement of the take up lever!
11.06 Pre-selecting the stitch length and fullnes
● To adjust the stitch length, move stitch
length controls 1 and 2 together.
● Pre-select fullness with adjustment
lever 3.
Fig. 11 - 05
+
_
6 cm
2
1
Fig. 11 - 06
3
2
1
To Next Page
Loading...
