Philips Efficia CM Series - Configuring the Server IP Settings

Configuring LAN Network Settings
Efficia CM Series Network Configuration Guide 2-3
LAN Configuration Overview
IP Address Type:StaticDHCP
If Static IP Addresses:
Range of IP Addresses: ____________________________________________
Subnet Mask: ____________________________________________
Gateway: ____________________________________________
DNS Server: ____________________________________________
Configuring the Server IP Settings
Use the Data Export Menu to configure the following server settings and data export
settings:
Network/server settings:
•
Data Export: Used to enable HL7 Data Export and select a network type.
•
Server Address: Enter the IP address or host name of the destination server.
The following settings are optional:
• Server Port: If necessary, change the default port number (4000) to the port number
used by the destination server.
• Export Port to cfg File: Select this check box if you use the Import Settings and
Export Settings features to import configuration settings on multiple monitors and
all monitors export data to the same server port number. The server port number is
saved to the .cfg file. For more information about exporting and importing
configuration settings, see the Efficia CM Series Patient Monitors Installation and
Configuration Guide.
• SSL: The Efficia CM Series monitor can use the secured socket (SSL/TLS) to make
secured connections to the server and to encrypt data. To use SSL/TLS, a root CA
certificate that can verify the server certificate must be imported before connection.
Measurement units:
• Blood Pressure Units
• Temperature Units
• CO2 Pressure Units
• CO2 (Gas)
• AGT/N20 (Gas)
• SpHb Units
(Masimo only)
• Height Units
• Weight Units
Specify that the above mentioned measurement units in the exported data match
the corresponding units of measurement on the receiving system, regardless of the
setting on the monitor.
Note — For information on the Save Patient Data option, see the Efficia CM Series Patient
Monitors Installation and Configuration Guide.