Configuring WLAN Network Settings
Efficia CM Series Network Configuration Guide 3-15
Configuring Security Settings
To connect to a wireless network that broadcasts its SSID:
If the credentials you enter in the
Wireless Security Settings Menu do not match those in
the authentication database, the radio will try to connect indefinitely. If this occurs, you
can do one of the following:
• Return to the Wireless Security Settings Menu and enter the correct credentials.
• If you do not have the correct credentials, try connecting to an open network (one
with no password) and then select Disconnect in the Security Settings Menu.
SSID Broadcast Disabled
To connect to a wireless network that does not broadcast its SSID:
Step
1
On the Admin tab in the System Menu, select the Wireless button.
The Available Wireless Networks menu appears.
2
If you do not see your network name in the list, select the Refresh button to
update the list.
3
Scroll through the list and select your network name.
The Security Settings Menu appears.
Note The options in the Wireless Security Settings Menu vary, depending
on the security type, encryption, and authentication methods used by the
selected network.
For more information about security settings, see “Security and Encryption
Options”
4
Enter the information required by your network and select Connect.
The monitor attempts to associate with the network and then displays the
Connected message when it successfully connects to the network.
Step
1
On the Admin tab in the System Menu, select the Wireless button.
The Available Wireless Networks menu appears.
2
In the Available Wireless Networks list, select Others....
The Wireless Security Settings Menu appears. The Network Name (SSID) field
is blank.
3
Select the Network Name (SSID) field.
A keyboard appears.
4
Enter the name of the network you want to connect to, and then select OK.
Note — The network name is case-sensitive.
5
Select Security.
The security options list appears.
To Next Page
Loading...
