Viewing Wireless Status
Troubleshooting
6-4 Efficia CM Series Network Configuration Guide
The following table describes the options in the Wireless status list
Parameter Description
Radio Information
Status
The current status of the radio. Possible values include:
• Down—The radio is not recognized and therefore not
associated. Restart the monitor to reload the firmware.
•
Disabled—The radio is disabled. To enable the radio, select
the Enable Radio button in the Network Test menu. When the
radio is disabled, it does not attempt to make a connection to
an AP.
• Not Associated—The radio has not established a connection to
an access point.
•
Associated—The radio has established a connection to an
access point.
• Authenticated—Credentials have been established.
Radio Type
The type of radio installed in the monitor.
Radio Mode • B Rates Only
• BG Rates Only
• G Rates Only
• BG Subset
• A Rates Only
• ABG Rates Full
• BGA Rates Full
• GN Rates
• N Rates
• ABGN Rates Full
• BGAN Rates Full
• BGN Rates Full
To Next Page
Loading...
