Philips Efficia CM Series - 2 Basic Operation; Front and Rear Panel Components

To Next Page

To Previous Page

Introduction

Efficia CM Series Repair Guide 1-1

Introduction

This guide provides repair procedures, performance verification procedures,

troubleshooting steps, and replacement parts for the Efficia patient monitors shown

below.

Intended Audience

This guide is intended for authorized biomedical engineers or technicians responsible

for repairing Philips patient monitoring systems. Before you attempt to service the

monitor, you must review the following information and familiarize yourself with the

safety information contained within:

• For information about configuring the monitor, see the Efficia CM Series Patient

Monitors Installation and Configuration Guide.

• For information about routine maintenance and the theory of operation, see the

Efficia CM Series Patient Monitors Service Guide.

• For detailed information about the operation of the monitor, see the Efficia CM

Series Patient Monitors Instructions for Use.

Navigation Controls

You can navigate by using the touch screen or the navigation wheel. The touchscreen

is standard on the CM100, CM120, and CM150 monitors and is optional on the CM10

and CM12 monitors. All Efficia CM monitors include a navigation wheel.

Efficia CM10 and CM12 Efficia CM100, CM120 and CM150

Other manuals for Philips Efficia CM Series