NOTE
Use only the printers listed here with your ultrasound system.
NOTE
The system uses the HP Universal Print Driver and the Epson Universal Print Driver, which
support additional printers not listed here. For the supported printers, see the manufacturer's
website and search for "universal print driver."
Supported External Printers
Printer Type Printer Manufacturers and Model Numbers
Black-and-white image
printer
Sony UP-D897/SYN
Color printer Sony UP-D25MD
Connecting an External Printer
WARNING
When using additional peripheral equipment powered from an electrical source other than
the ultrasound system, the combination is considered to be a medical system. It is your
responsibility to comply with IEC 60601-1 and test the system to those requirements. If you
have questions, contact your Philips representative.
WARNING
Do not use nonmedical peripherals, such as report printers, within 1.5 m (5 ft) of a patient,
unless the nonmedical peripherals receive power from an isolation transformer that meets
medical safety standards, as defined by standard IEC 60601-1.
1. Turn off the system and unplug the power cord from the power source.
2. Connect a standard USB cable between the USB port on the printer and a USB port
on the system.
Connecting Devices
Preparing the System
EPIQ 7 User Manual 4535 617 25341 103
To Next Page
Loading...
