Control Description
Image plane rotation buttons
Neutral position indicators, showing no deflection
Rotating the X7-2t Image Plane
You can rotate the image plane on the X7-2t TEE transducer to achieve a 360-degree view of
the heart. Rotation stops when you release either button.
The current degree of rotation appears in either the upper or lower part of the display,
depending on image orientation. Because the center of the image array is the pivot point, you
can achieve a 360-degree view.
• To rotate the X7-2t transducer image plane, do either of the following:
• To rotate the imaging plane toward the 180-degree position, press the image plane
rotation button that is distal to the system.
• To rotate the imaging plane toward the 0-degree position, press the button that is
proximal to the system.
• To rotate the X7-2t transducer image plane using a system control, use the Seek Angle soft
key.
Using the X7-2t TEE Transducer
Transesophageal Transducers
EPIQ 7 User Manual 4535 617 25341 215
To Next Page
Loading...
