Philips epiq 7 - Preparing Transducers for Intraoperative Use

L15-7io Transducer
NOTE
This transducer is available only in countries or regions where it is approved. For information
specific to your region, contact your local Philips representative.
L15-7io Transducer Features and Specifications
Features Linear array designed for mid- to high-frequency superficial imaging and high-resolution
intraoperative vascular applications. Supports 2D, PW Doppler, Color Doppler, Color Power
Angio imaging, and XRES processing. Used for evaluating blood vessels, musculoskeletal
exams, small parts (breast, testicles, thyroid) imaging, and epicardiac imaging.
• Phased linear array with 128 elements
• 8 degrees of trapezoidal imaging, 23 mm (0.9 in) effective aperture length
Frequency Operating range: 15 to 7 MHz
Biopsy Capable No
Specifications • Lens footprint: elevation, 10 mm (0.4 in); scan plane, 32 mm (1.25 in)
• Transducer length: 89 mm (3.5 in)
• Cable length: 2 m (80 in)
Preparing Transducers for Intraoperative Use
1. Place 20 cc of sterile gel or saline into the transducer cover.
Preparing Transducers for Intraoperative Use
Intraoperative Transducers
EPIQ 7 User Manual 4535 617 25341 191