EasyManua.ls Logo

Philips epiq 7 - Recording; Using the DVD Recorder

Philips epiq 7
318 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Touch Body Markers on the ABC Label touch screen to display the Body Markers touch
screen for the current transducer and preset.
3. Touch a body marker control to put the corresponding body marker on the display in the
home location or to replace an existing body marker.
4. Use the trackball to position the transducer scan plane indicator on the body marker. Turn
Probe Rotate to change the orientation of the transducer scan plane indicator.
5. Do any of the following:
To move the marker, exit and reenter the Body Markers touch screen, or exit and
reenter annotations mode. When you reenter the Body Markers touch screen you can
edit the marker.
To remove a body marker, touch Erase Body Mark.
To close the Body Markers touch screen, touch another tab title or press ABC Label.
Recording
You can record live imaging to a local DVD recorder and simultaneously record comments. You
can play back recordings on other DVD players. Playback is not supported on the system.
Using the DVD Recorder
NOTE
Use only DVD+RW media in the DVD recorder.
NOTE
Always format a new disc before using it with the DVD recorder. Also, Philips recommends
reformatting a used disc before using it with the DVD recorder.
1. To turn on the DVD recorder, press on the front panel.
2. To insert a disc, press OPEN/CLOSE (on the recorder front panel), place a disc in the tray,
and press OPEN/CLOSE again.
3. To record, touch DVR on the touch screen and use any of the following controls on either
the DVR touch screen or the DVD recorder:
(Play) to play back the video at normal speed
Performing an Exam
Recording
162 EPIQ 7 User Manual 4535 617 25341

Table of Contents

Other manuals for Philips epiq 7

Related product manuals