Philips HD11 User Manual

HD11
Service Manual
4535 612 10261 Rev A February 2005
CSIP Level 1
Copyright © 2005 Koninklijke Philips Electronics N.V. All rights reserved
About This Manual
Audience This document and the information contained in it is strictly reserved for current Philips Medical
Systems (“Philips”) personnel, Philips licensed representatives, and Philips customers who have
purchased a valid service agreement for use by the customer’s designated in-house service
employee on equipment located at the customer’s designated site. Use of this document by
unauthorized persons is strictly prohibited. This document must be returned to Philips when the
user is no longer licensed and in any event upon Philips’ first written request.
This manual supports the field service maintenance and repair of the HD11 Ultrasound System.
The user of this document is a qualified ultrasound electronics technician who has completed
training classes on the system and its peripherals.
Manual Format This manual is in Portable Document Format (PDF), for viewing on a laptop computer with
Acrobat Reader. A list of bookmarks functions as an additional table of contents. Those book-
marks, the table of contents, and cross-references use hypertext links to provide access to the
referenced information.

Philips HD11 Specifications

General

Brand	Philips
Model	HD11
Category	Diagnostic Equipment
Language	English

Summary

About This Manual

Audience

Defines the intended users of the manual.

Manual Format

Describes the document's format and features like PDF and bookmarks.

General Information

Introduction

Describes the manual's purpose and the information it contains.

System Overview

Offers a high-level description of the HD11 ultrasound system's function.

System Specifications

Introduction

Introduces the system specifications section and its content.

Physical Specifications

Outlines the system's dimensions and weight.

Electrical Specifications

Lists the system's electrical input, output, and load parameters.

Safety

Introduction

Introduces the safety information relevant to the HD11 Ultrasound System.

About Safety Information

Explains hazard symbols (WARNING, CAUTION, NOTE) used in the manual.

Theory of Operation

Introduction

Provides a functional overview of the system by breaking it down into elements.

System Architecture

Describes the system's combination of functional elements and hardware architecture.

Installation

Introduction

Outlines the steps for system installation, including site checks and configuration.

Installation Checklist

Lists and verifies the steps required for proper system installation.

Performance Tests

Introduction

Introduces test procedures for system diagnosis and assurance of operation.

Test and Inspection Matrices

Provides tables indicating tests required under various system conditions.

Electrical Safety Tests

Introduction

Explains the purpose of electrical safety tests for system safety.

Adjusting the Monitor

Adjusting the Monitor BRIGHTNESS and CONTRAST Range

Details the tool for setting monitor brightness and contrast controls.

Adjusting the Monitor Signal Input Voltage

Instructions for verifying the monitor's signal input voltage setting.

Preventive Maintenance

Introduction

Identifies activities for quality assurance (QAA) compliance.

Equipment and Supplies

Lists the tools, parts, and supplies needed for maintenance activities.

Cleaning

Provides instructions for cleaning system components and peripherals.

Troubleshooting

Introduction

Guides on determining if a system is failing and isolating the cause.

Clarifying Symptoms

Actions and considerations to clearly describe a symptom for isolation.

Isolating Causes

Guides on identifying and prioritizing potential root causes of a system symptom.

Disassembly and Reassembly

Introduction

Covers system disassembly and reassembly for parts replacement.

Disassembly Procedures

Lists the procedures for disassembling various system components.

System Enclosures

Details procedures for removing system panels and covers like side, front, and top.

Cabling

Introduction

Explains how to use illustrations and tables to identify system cables and part numbers.

System Cabling Diagrams

Refers to figures showing signal, power, and peripheral connection diagrams.

Cable Part Numbers

Lists part numbers for interconnect and power distribution cables.

Change History

Introduction

Summarizes software and hardware changes and part number updates.

Configuration

Introduction

Lists software part numbers, primary PCB locations, and configuration information.

System Software

Refers to tables for software releases and associated part numbers.

Primary PCB Information

Shows locations of primary PCBs and refers to figures for detailed illustrations.

Parts

Introduction

Introduces the section on system parts information and tables.

How and Where to Find a Part Number

Guides on locating part numbers using illustrations and tables.

Illustrations

Refers to figures for visually locating and identifying parts.

Transducer Information

Introduction

Summarizes general and parts information for the transducers used with the HD11 system.

Table 15-1 Curved Array Transducers

Lists specifications for curved array transducers, including applications and frequency.