4535 612 10261 HD11 Service Manual Page 120
CSIP: Level 2 Installation: Physical Installation Procedures
Dual Peripherals
Figure 5-28 Removing the Top Hatch
2
1
Flathead
screws
(4 plcs)
Top hatch
➤ To install dual top-mounted
peripherals
NOTE Review “Installing the Printers
and VCR” on page 82.
1. Remove the four flathead screws
securing the top hatch to the top
cover.
2. Pull the system-to-VCR and sys-
tem-to-color printer cables out of
the hatch opening and drape them
off to the side. Proceed to step 3.
To Next Page
Loading...