4535 612 10261 HD11 Service Manual Page 218
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-31 Removing the PC Assembly
7
Screw slots
8
7. Slide the PC assembly, approximately
an inch, toward the rear of the sys-
tem.
8. Line up the screw heads with the
two upper screw slots in the PC
assembly bracket and lift the PC off
the cart frame.
This completes the PC assembly removal
procedure.
Perform this procedure in reverse for
reassembly.
Return to Disassembly Procedure List (2
of 2).
To Next Page
Loading...