Philips HD11 - Setting the Date and Time; Figure 5-7 Date and Time Properties Window

4535 612 10261 HD11 Service Manual Page 93
CSIP Level 1 Installation: Powering On and Configuring the System
Setting the Date
and Time
➤ To set the system date and time
1. On the Setup window, click the Date/Time button.
The Date and Time Properties window opens (Figure 5-7).
2. Click the Time Zone tab.
3. Click the list and select the local time zone.
4. Click the Date & Time tab.
5. Change the settings to the local date and time, and click OK.
Figure 5-7 Date and Time Properties Window