Philips HD11 - Setting the Institution Name; Figure 5-6 Border and Prompts Window

4535 612 10261 HD11 Service Manual Page 92
CSIP Level 1 Installation: Powering On and Configuring the System
Setting the
Institution
Name
➤ To check or set the institution name
1. Press Setup.
The Setup window opens (Figure 5-1).
2. Click the System tab.
3. Click the Border and Prompts button.
The Border and Prompts window opens (Figure 5-6).
4. Type the institution name, and click OK.
Figure 5-6 Border and Prompts Window