Philips HD11 - Figure 10-28 Disconnecting the Modem

4535 612 10261 HD11 Service Manual Page 215
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-28 Disconnecting the Modem
RJ-45 cable
4
USB cable
5
67
Modem
4. Disconnect the RJ-45 cable from the
top of the modem.
5. Disconnect the modem USB cable
from the USB port on the back of
the PC assembly.
6. Pull the modem off the Velcro pad.
7. When installing a replacement
modem, place a new piece of Velcro
on the new modem and perform this
procedure in reverse for reassembly.
This completes the modem removal pro-
cedure.
Return to Disassembly Procedure List (1
of 2).