4535 612 10261 HD11 Service Manual Page 124
CSIP: Level 2 Installation: Physical Installation Procedures
Figure 5-32 Installing the Dual Peripheral Mounting Plate
10
Panhead
screws
(4 plcs)
9
8
8. Set the dual peripheral mounting
plate on the peripheral mounting
plate bracket.
9. Feed the peripheral cables through
the mounting plate (rectangular)
slots.
10. Secure the mounting plate with four
panhead screws and washers. Pro-
ceed to step 11.
NOTE These steps are also valid for
the single (small) peripheral
mounting plate installation.
To Next Page
Loading...