4535 612 10261 HD11 Service Manual Page 223
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-36 Removing the PC Boards
Hauppauge video
capture board
Graphics board
9
10
8
NOTE All the boards can be removed
individually without too much
difficulty with exception of the
Hauppauge Video Capture
board Figure 10-37 and the
Graphics board Figure 10-38.
8. Before proceeding, check that the
PC rear panel cables are discon-
nected from the boards you want to
remove.
9. Remove the one panhead screw
securing the board to the PC con-
nection slot.
10. Gently pull and slightly wiggle the
board until it releases from the
motherboard connector.
This completes the PC boards removal
procedure.
Return to Disassembly Procedure List (2
of 2).
To Next Page
Loading...