Philips HD11 - Figure 10-68 Rotating and Supporting the Control Panel Module

4535 612 10261 HD11 Service Manual Page 255
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-68 Rotating and Supporting the Control Panel
Module
3
2
Support
2. Rotate the control panel 90 degrees,
(toward the left facing the system).
Rotating the control panel allows
easier access for removing the lift
column gas strut.
NOTE When preparing to remove the
lift column gas strut, a support
must be placed under the con-
trol panel assembly to support
the weight that is carried on
the lift column.
3. Place a support between the control
panel assembly and the top of the
cart. Proceed to step 4.