4535 612 10261 HD11 Service Manual Page 80
CSIP Level 1 Installation: Uncrating and Unpacking the System
- All necessary Internet Protocol (IP) addresses and subnet information.
- Application Entity (AE) Titles for the ultrasound system and all connected devices.
- Port Numbers for all connected devices.
- IP address, subnet mask, Port number, and DICOM AE Title for the HD11 system.
- IP Address, Port number, and AE Title for each DICOM server.
• Determine the type of network cabling installed.
• Identify OEM equipment installers and contact them regarding the installation.
• Check device compatibility prior to connecting new devices (such as, printers or archive
devices) to the network.
See “Configuring the DICOM Feature” on page 97.
Uncrating and
Unpacking the
System
Inspect the shipping container and uncrate the system as described in the following sections.
Inspecting the
Crate
Inspect the shipping crate before unpacking the system:
• Examine the shipping crate for damage. Look for evidence that the crate was opened.
• Verify that the Shockwatch and Tiltwatch indicators on the outside of the carton have not
been activated. If the indicators are red, report this fact to the carrier and to the Philips
Ultrasound traffic department. Be sure to check the system for damage when it is uncrated.
• Report any damage or missing inventory to the carrier and to the Philips Ultrasound traffic
department.
To Next Page
Loading...