4535 612 10261 HD11 Service Manual Page 342
CSIP Level 1 Configuration: Peripheral Settings
Changing the Boot Sequence Temporarily
➤ To change the boot sequence temporarily
1. Adjust the VGA display height to show the whole screen. See “To adjust the VGA vertical
size” on page 165.
2. Reboot the system.
3. As the system boots up, press the Mic key repeatedly, until the Please Select Boot
Device screen opens.
4. Use the arrow keys to select the drive to boot from:
- Select "4M-Sony CD-RW CRX225E” as your 1st Boot Device
- Select "Hardrive" as your 2nd Boot Device.
5. Press Return.
Peripheral
Settings
The initial Philips-recommended peripheral settings for use with the HD11 system are provided
in this section (“B&W Printer” on page 343, “Color Printer” on page 343, and “VCR” on page
343).
To Next Page
Loading...