4535 612 10261 HD11 Service Manual Page 221
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-34 Disconnecting the PC Rear Panel Cables
6
PC rear panel
See “Primary System PCB
Names and Locations (PC)”
on page 317.
6. Disconnect the PC rear panel cables
connected to the PC boards that are
to be removed. Proceed to step 7.
CAUTION Do not connect the aux-
iliary power cable
453561175221 to the
E-box Interface Board
connector located on the
back of the PC. Doing so
will destroy the rear I/O
panel Video I/O card. See
Figure 11-1 for proper
cabling of the system.
To Next Page
Loading...