Philips HD11 - Cables; Optional Peripherals; Device Safety Requirements and Regulatory Compliance

4535 612 10261 HD11 Service Manual Page 40
CSIP Level 1 General Information: Device Safety Requirements and Regulatory Compliance
Cables Physical cables provide system signal interconnect and power distribution. Refer to Section 11,
“Cabling”, for detailed cable information.
Optional
Peripherals
The VCR, the color printer, or both mount on a shelf on top of the cart (Figure 1-1). The B&W
printer mounts in a bay below the system control panel (Figure 1-1). Figure 1-3 shows the OEM
peripherals that can be ordered for the system.
Plain-paper printers supported by the system are not mounted on or powered by the system.
Device Safety
Requirements
and
Regulatory
Compliance
The HD11 Ultrasound System complies with the requirements for the International Electrotech-
nical Commission (IEC), the Canadian Standard Association (CSA), and the Underwriters Labo-
ratories (UL).
• IEC 60601-1
• IEC 60601-1-2, 2nd edition (Class B)
• CSA22.2 No. 601.1
• UL 2601-1
For information about applicable safety standards and specifications, see the HD11 Getting Started
manual shipped with the system.