Philips HD11 - E-box Assembly; Figure 10-41 Locating the E-box Mounting Screws

To Next Page

To Previous Page

4535 612 10261 HD11 Service Manual Page 228

CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures

E-box Assembly

Figure 10-41 Locating the E-box Mounting Screws

Torx screws

(10 plcs)

3 screws

4 screws

➤ To remove the E-box assembly

NOTE You can perform most E-box

service without removing the

E-box from the system. To per-

form service that does require

removing the E-box, you must

also remove the power supply.

First, refer to the System Enclosures

procedure and perform all steps before

proceeding.

Next, refer to the Power Supply proce-

dure and perform all steps before pro-

ceeding.

1. Locate all 10 of the screws that

secure the E-box assembly to the

cart frame and remove them. Pro-

ceed to step 2.

Related product manuals