4535 612 10261 HD11 Service Manual Page 266
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-79 Removing a System Caster
NOTE System shown tilted for
illustration clarity.
Hexhead bolts (4 plcs)
4
4. Remove the four hexhead bolts
securing the caster to the cart weld-
ment.
This completes the removal procedure
for a single caster. Repeat as neccessary
for other casters.
Perform this procedure in reverse for
reassembly.
Return to Disassembly Procedure List (1
of 2).
To Next Page
Loading...