4535 612 10261 HD11 Service Manual Page 210
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-23 Disconnecting the Printer Cables
3
4
5
3. Disconnect the printer power cord
and the USB cable from the rear of
the printer.
4. Loosen the screw on the printer
bracket.
5. Loosen the OEM strap securing the
printer in the OEM bay. You don’t
need to remove it if you are reinstall-
ing a printer. If you need to remove
the OEM strap, proceed to step 6.
Otherwise, proceed to step 9.
To Next Page
Loading...