4535 612 10261 HD11 Service Manual Page 232
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-45 Removing the E-box Access Panel
Handle
Twist-lock
Twist-lock
5
CAUTION Always observe proper
ESD procedures when
servicing the inside of the
PC. Wear a grounded
wrist strap and work on a
static-dissipating mat if
possible.
5. There are two twist-locks on the
E-box access panel. Lift both the
twist-locks outward and turn them
90 degrees and pull the access panel
open using the handle on the panel.
Do not pull on the twist-locks. Pro-
ceed to step 6.