4535 612 10261 HD11 Service Manual Page 203
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-16 Removing the Upper Soft Key Panel Screws
Rotate 90 degrees
(twivel base)
Twivel hat
Torx screws (2 plcs)
9
8
8. Rotate the monitor twivel base
90 degress.
9. Remove the two Torx screws secur-
ing the soft key panel to the twivel
hat. Proceed to step 10.
To Next Page
Loading...