4535 612 10261 HD11 Service Manual Page 267
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Crating the HD11 Ultrasound System
Figure 10-80 Removing the Monitor
2
1
3
➤ To crate the HD11 Ultrasound
System
NOTE You must order the shipping
crate (P/N 453563468821)
before proceeding with this
crating procedure. This pack-
age contains all the hardware
necessary for proper shipping.
1. Remove the monitor connector
cover.
2. Disconnect the power and audio
cables.
3. Lift up the release lever under the
front bezel of the monitor and slide
the monitor off of the monitor base.
4. Package the monitor in a Philips
monitor box (BoxMaker # 3500419)
and HD11 monitor inserts. Proceed
to step 5.
To Next Page
Loading...