4535 612 10261 HD11 Service Manual Page 99
CSIP Level 1 Installation: Checking System Functionality
3. Click Video Installation.
4. Click OK.
5. Select PAL.
6. Click OK. The driver is reinstalled with the correct configuration. This takes about 20 sec-
onds.
7. Click Close to close the Setup window. The new setting takes effect after the system is
restarted.
NOTE Printer and VCR settings can be checked as described in “Peripheral Settings” on
page 342.
Checking
System
Functionality
Ta b le 6 -1 , Tab le 6 -2 , and Ta b le 6 - 3 describe what tests need to be performed following installa-
tion. The goal is to verify basic system functionality. If system testing reveals any problems, trou-
bleshoot, repair, and retest the system before presenting it to the customer. Throughout these
checks, continue to verify the following general observations:
• The image is correctly placed on the video display.
• The indicators and backlighting associated with the controls on the control panel indicate
correctly.
• The moveable controls operate smoothly and efficiently.
• The system responds correctly to all controls.
• The image printers, if installed, make a print of the system screen. Also verify that the print
images are spatially correct horizontally and vertically and that they contain all the informa-
tion being displayed on the system monitor.
To Next Page
Loading...