4535 612 10261 HD11 Service Manual Page 206
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-19 Removing the System Speakers
Torx screws (4 plcs)
13
14
Speaker
13. To replace one the the system speak-
ers, remove the four Torx screws
securing the speaker to the control
panel housing.
14. Disconnect the cable from the
speaker.
This completes the soft key panel and
system speakers procedure.
Perform this procedure in reverse for
reassembly.
Return to Disassembly Procedure List (1
of 2).
To Next Page
Loading...