4535 612 10261 HD11 Service Manual Page 254
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Lift Column Gas Strut
Figure 10-67 Raising the Control Panel Module
1
Handle
➤ To remove the lift column gas
strut
Refer to System Enclosures for system
enclosures removal and perform all the
steps before proceeding.
1. Raise the control panel to its full
height by pressing both handle trig-
gers and simultaneously pulling
upward on the handle. Proceed to
step 2.
To Next Page
Loading...