4535 612 10261 HD11 Service Manual Page 235
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-48 Removing the Left Side Panel
To r x s c r e w s
(2 plcs)
3
2
NOTE Both side panels must be
removed before removing the
front panel.
2. Remove the two Torx screws secur-
ing the left side panel enclosure.
3. Pivot the back side of the panel away
from the system, and then gently
slide the panel toward the rear to
remove it. Proceed to step 4.