4535 612 10261 HD11 Service Manual Page 265
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
System Casters
Figure 10-78 Preparing the System for Caster
Replacement
2
2
3
3
1
➤ To remove a system caster
1. Disconnect the system power cord
from the main AC supply.
WARNINGThe following steps
require that the system
be in a tilted position. To
reduce the risk of injury
or system damage from
toppling, the monitor
should be removed
before tilting the system.
2. Remove the monitor (see “Moni-
tor” on page 195).
3. Carefully tilt the system and prop it
up with a solid object that provides
adequate clearance for caster
removal. Proceed to step 4.
To Next Page
Loading...