4535 612 10261 HD11 Service Manual Page 121
CSIP: Level 2 Installation: Physical Installation Procedures
Figure 5-29 Installing the Peripheral Mounting Plate
Bracket
3
4
Panhead
screws
(6 plcs)
Peripheral
mounting
plate bracket
3
3. Place the peripheral mounting plate
bracket in the top cover opening and
arrange the cables so they fit through
the bracket openings.
4. Secure the peripheral mounting plate
bracket, using six panhead screws
with washers. Tighten the screws.
Proceed to step 5.
To Next Page
Loading...