4535 612 10261 HD11 Service Manual Page 350
CSIP Level 1 Configuration: Peripheral Settings
➤ To change the VCR displayed menu settings
1. Power up the VCR.
2. Press and hold Menu for at least 2 seconds to initiate the VCR display.
3. Select items with JOG/ADJUST. Refer to Table 13-5 for displayed menu settings.
4. Select settings with FRAME/FIELD ENTER.
5. Change the settings with JOG/ADJUST.
6. Exit and save changes by pressing MENU.
NOTE No items are displayed on the system monitor when this menu is invoked.
Table 13-6 Mitsubishi HS-MD3000E/U VCR Hidden Menu Settings
for the HD11 System
Setting/Item
Display NTSC Setting PAL Setting
Picture Control (Sharpness) PC 0 0
(Head) Switching Point SP 65 65
Position Up/Down Ud 0 0
Position Left/right Lr 0 0
Chroma Amplitude CA 2 2
Hue (Color Phase) CP 0 0
Color Delay Cd 2 2
bC –1 –1
CC 1 1
bd ON ON
To Next Page
Loading...