4535 612 10261 HD11 Service Manual Page 197
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-10 Removing the Control Panel
2
3
Cables
2. Tilt the control panel up from the
front side.
3. Disconnect the seven cables con-
nected to the control panel PCB.
Refer to Figure 11-1 and Figure 11-2
when re-cabling the control panel
assembly.
This completes the control panel
removal procedure.
Perform this procedure in reverse for
reassembly.
Return to Disassembly Procedure List (1
of 2).
To Next Page
Loading...