4535 612 10261 HD11 Service Manual Page 125
CSIP: Level 2 Installation: Physical Installation Procedures
Figure 5-33 Installing the Dual Peripherals
12
11
11
VCR
Color printer
11. Open the straps and place the VCR
and color printer in position on the
peripheral mounting plate.
12. Tighten the straps to hold the
peripherals, securing the straps with
the Velcro end.
13. Connect the system VCR and color
printer cables in accordance with the
cabling diagrams (Figure 11-4 and
Figure 11-6). Proceed to step 14.
NOTE These steps are also valid for
the single (small) peripheral
mounting plate installation.
To Next Page
Loading...