4535 612 10261 HD11 Service Manual Page 207
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
VCR or Color Printer
Figure 10-20 Unstrapping the VCR or Color Printer
1
2
3
VCR
Color printer
➤ To remove the VCR, the color
printer, or both
NOTE Removing either peripheral is
essentially the reverse of
installing it.
1. If there is a peripheral cover (garage)
over the peripheral, unsnap and
remove it.
2. Disconnect all the cables connected
to the peripheral.
3. Unstrap the peripheral and slide it
off the mounting plate.
This completes the VCR and color
printer removal procedure.
Refer to the Dual Peripherals installation
procedure for reinstallation of the VCR
or the color printer.
Return to Disassembly Procedure List (1
of 2).
To Next Page
Loading...