4535 612 10261 HD11 Service Manual Page 231
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-44 Disconnecting the Token Ring Cable
Release tab
4
Release tab
4
CAUTION The token ring cable con-
nectors are easily dam-
aged. Be gentle when
connecting and discon-
necting the cable.
4. Disconnect the Token Ring cable
from the Signal Processor Board by
squeezing the release tabs at the top
and bottom of the cable connector
and pulling the connector out of the
slot. Proceed to step 5.
To Next Page
Loading...