4535 612 10261 HD11 Service Manual Page 202
CSIP Level 1 Disassembly and Reassembly: Disassembly Procedures
Figure 10-15 Removing the Video Monitor
6
Latch handle
6
7
5
5. Disconnect all the monitor cables
(Figure 5-24).
6. Press up on the latch handle under
the front edge of the monitor and
pull the monitor forward until it
stops.
7. Tilt up the front of the monitor and
lift the monitor off the twivel base.
Proceed to step 8.
To Next Page
Loading...