Battery Status Indicators
The system is running on AC power and the battery is 80% to 100% charged.
The system is running on AC power and the battery is 60% to 80% charged.
The system is running on AC power and the battery is 40% to 60% charged.
The system is running on AC power and the battery is 20% to 40% charged.
The system is running on AC power and the battery is 0% to 20% charged.
The system is running on AC power and the battery is not charged or is disconnected.
System Security
The data security feature, if enabled on your system, limits access to previously stored patient
data and images. To gain access to such data, you must first log on to the system using an ID
and a password. When you are finished using the system, you can log off manually or simply
shut down the system, which logs you off automatically. Only a registered user can change the
password.
The data security feature is set up by your system administrator. For information, see “System
Administration” in the Help. To display the Help, touch
.
Logging On to the System
When data security is enabled, you must log on to the system before you are able to view or
load patient files.
1. Click (Log On) at the bottom of the imaging display.
System Security
Using the System
EPIQ 7 User Manual 4535 617 25341 133
To Next Page
Loading...
