Philips epiq 7 - Using the System; Turning the System On and Off

Using the System
The topics that follow will help you understand and use the features of the system.
Turning the System On and Off
The (On/Off) control is located on the upper left section of the control panel. The lighting of
the control changes to indicate its status. The different indicators are described in the following
table.
Power Status and Indicators
System Status Power Cord Status Power Control Indicator Sleep Control Indicator
Power off Disconnected Unlighted Unlighted
Power off Connected Lighted white Unlighted
Power on Connected Lighted green Lighted white
Sleep Mode on Disconnected Blinking amber Unlighted
Sleep Mode on Connected Blinking green Unlighted
CAUTION
If you press and hold the
(On/Off) control to force the system to shut down, you will have
to wait longer than usual to use your system the next time you turn it on. You may also
corrupt files, which can result in an inoperative system or the loss of patient data. Wait
90 seconds (or 3 minutes if DICOM activity is occurring) before forcing the system to shut
down.
CAUTION
The batteries are used to ensure quick system startup and easy movement of the system
only. You cannot perform scans while in battery mode.
5
Turning the System On and Off
Using the System
EPIQ 7 User Manual 4535 617 25341 113