Automatic Display Dimming
To preserve monitor life and prevent burned-in display artifacts, the system automatically dims
the display after more than 2 hours of operation with no control changes. The system restores
full brightness as soon as you use any system control.
System Controls
System controls are located on the control panel, the touch screen, and the keyboard.
Control Panel
The control panel contains the main imaging controls. These controls include buttons, knobs,
TGC slide controls, and a trackball. The control module also allows you to select imaging modes,
review and annotate images, perform measurements and calculations, and access Philips
SupportConnect.
The touch screen, located above the control panel, displays controls used to select transducers,
enter patient data, select applications, and change setups.
Monitor Adjustments
Using the System
EPIQ 7 User Manual 4535 617 25341 119
To Next Page
Loading...
