Control Panel Release Button
4. When the release button lights, the control panel is unlocked.
5. Use the front handle to rotate the control module or move it up or down.
6. Press the release button again to lock the control panel. When the control panel is locked,
the release button light is off.
Setting the Depth Control
The System Settings display in the setups provides an option for you to select how the Depth
control responds when you turn it.
1. Touch Utilities.
2. On the System tab, touch Setups.
3. Click System Settings, and then click the Mode tab.
4. Under Depth Control, do one of the following:
• Select Increase Clockwise to increase depth when the control is turned clockwise.
• Select Increase Counter Clockwise to increase depth when the control is turned
counter-clockwise.
5. Click Close.
Touch Screen
The touch screen above the control panel provides controls that change function according to
the current mode or system function.
Using the System
System Controls
122 EPIQ 7 User Manual 4535 617 25341
To Next Page
Loading...
