Identifies ESD (electrostatic-discharge) sensitivity of a connector that is not
tested as specified in IEC 60601-1-2. Do not touch exposed connector pins.
Touching exposed pins can cause electrostatic discharge, which can damage the
product.
Identifies an On/Off control.
On a two-position power switch, represents On ( ) and Off ( ).
Identifies a safety note.
Indicates that the user should see the instructions for use for safety
information.
Identifies equipotential ground.
Identifies earth ground.
Identifies protective earth ground.
Nonionizing electromagnetic radiation. Indicates that interference may occur in
the vicinity of equipment marked with this symbol.
Indicates conformance with European Council Directive 93/42/EEC.
The radio component contained in this device is compliant to Council Directive
1999/5/EC (Radio Equipment and Telecommunications Terminal Equipment
Directive).
Symbols
Safety
EPIQ 7 User Manual 4535 617 25341 39
To Next Page
Loading...
