UM EN AXL E SYS INST
50
PHOENIX CONTACT 8395_en_03
5.3 IO-Link/analog converter
The IO-Link/analog converter is an IO-Link device that converts analog signals into the
IO-Link protocol. Depending on the version, the IO-Link/analog converter offers you the
possibility to capture the signals from analog sensors via an IO-Link master or to transmit
them to analog actuators. Conversion of analog signals directly at the measurement loca-
tion and digital transmission via unshielded cables simplify installation and result in interfer-
ence-free transmission of measured values.
The IO-Link/analog converters are designed as plastic versions.
The IO-Link/analog con-
verters can be supplied in straight or rectangular format.
Figure 5-6 Analog data acquiring/transmitting
To Next Page
Loading...
Need help?
General