Phoenix Contact FL SWITCH LM 8TX-E - Page 73

Configuration and diagnostics
7278_en_04 PHOENIX CONTACT 3-45
flWorkFWCtrlSerialBaud
flWorkFWCtrlSerialDataBits
flWorkFWCtrlSerialStopBits
flWorkFWCtrlSerialParity
flWorkFWCtrlSerialFlowControl
OID 1.3.6.1.4.1.4346.11.11.11.2.6.1
Syntax Integer
Access Read
Description This object can be used to request the set data transmission rate of the serial interface:
2400 baud 1
9600 baud 2
19200 baud 3
38400 baud 4
57600 baud 5
115200 baud 6
OID 1.3.6.1.4.1.4346.11.11.11.2.6.2
Syntax Integer
Access Read
Description Contains the number of data bits in the serial interface:
8 bits 1
OID 1.3.6.1.4.1.4346.11.11.11.2.6.3
Syntax Integer
Access Read
Description Contains the number of stop bits in the serial interface:
1 bit 1
2 bits 2
OID 1.3.6.1.4.1.4346.11.11.11.2.6.4
Syntax Integer
Access Read
Description Contains the parity mode for the serial interface:
None 1
Odd 2
Even 3
OID 1.3.6.1.4.1.4346.11.11.11.2.6.5
Syntax Integer
Access Read
Description Contains the selected flow control for the serial interface:
None 1
Hardware 2